Main > Driving & Racing Cabinets
Emulator/Driving Cab info thread - Beginners start here!
baritonomarchetto:
After the support of Cruisn' USA/World to sequential gear, i decided to "toy withn another serie that deserve particular interest: Hard/Race Drivin'. I couldn't do it by modifying the drivers (as you know, drivin' serie games rely on analog shifters) BUT i had success by writing a script to be run before the emulator. You can download it from the RacerMAME site in the download section ;)
PS: the script works with EVERY MAME version and with Model 2 emulator ;)
In particular, games supported are:
MAME: Race/Hard Drivin', Cruisn' USA/World
RacerMAME: Race/Hard Drivin' (Cruisn' USA/World shifter is hard coded in the driver)
Model 2 Emulator: "all" (tested only Daytona USA)
remember to match gears in the H2Seq.ini file and the emu
brad808:
--- Quote from: baritonomarchetto on July 07, 2012, 06:59:25 am ---After the support of Cruisn' USA/World to sequential gear, i decided to "toy withn another serie that deserve particular interest: Hard/Race Drivin'. I couldn't do it by modifying the drivers (as you know, drivin' serie games rely on analog shifters) BUT i had success by writing a script to be run before the emulator. You can download it from the RacerMAME site in the download section ;)
PS: the script works with EVERY MAME version and with Model 2 emulator ;)
In particular, games supported are:
MAME: Race/Hard Drivin', Cruisn' USA/World
RacerMAME: Race/Hard Drivin' (Cruisn' USA/World shifter is hard coded in the driver)
Model 2 Emulator: "all" (tested only Daytona USA)
remember to match gears in the H2Seq.ini file and the emu
--- End quote ---
:notworthy: You sir are a hero! Finally I can get rid of glovepie when using model 2 emulator. Before I had to create an ahk to open glovepie and start a script and then load up hyperspin. Unfortunately the ahk would only open the script once windows was loaded for some reason which left me with a problem since I replaced explorer.exe with the ahk file. Now I just added H2Seq to my hyperspin start up program in hyperhq and it works flawlessly. I can just point the windows shell to hyperspin.exe and be done with it, no messing around just simply works good!
Edit: Correction I still need the ahk to load up logitech profiler before hyperspin..... but regardless the part that was giving me problems is now cleared up because of this.
baritonomarchetto:
Replacing the explorer shell with the favourite front end is a solution that i also tryied in the past to, essentially, remove the taskbar and desktop. This solution makes eventual modifications a pain in the butt and, like your case, the lost of features like the possibility to easily launch applications on startup. For people like me that, for obscure reasons, find more enjoyable the modification of applications and the experimetation of new solutions for the cabinet :dunno ;D having fast access to explorer is a fundamental prerequisite. In the end i preferred to keep explorer masked by a free program called "Emerge Desktop": this let me run my FE (advancemenu, but also FEEL is a great FE) and H2Seq on startup and nothing more is needed :afro:
joearcade:
Hi love the post! I was wondering if anyone can direct me to where I can get a working copy of Outrun for Final Burn-FF. I read in the post that v.080 works, that is pretty old and I am not doing well finding it. Also I could use a copy of the Final Burn-FF that works. I know that the FF portion is an upgrade to v.157 Final Burn but I am have difficulties getting them to "mesh" together. Any help would be greatly greatly appriecated. I am trying to emulate outrun on my old outrun cab with force feedback. I own the outrun board so I am legit. Thanks.
Joe
BadMouth:
--- Quote from: joearcade on July 27, 2012, 10:24:04 am ---Hi love the post! I was wondering if anyone can direct me to where I can get a working copy of Outrun for Final Burn-FF. I read in the post that v.080 works, that is pretty old and I am not doing well finding it. Also I could use a copy of the Final Burn-FF that works. I know that the FF portion is an upgrade to v.157 Final Burn but I am have difficulties getting them to "mesh" together. Any help would be greatly greatly appriecated. I am trying to emulate outrun on my old outrun cab with force feedback. I own the outrun board so I am legit. Thanks.
Joe
--- End quote ---
There is a link to the emulator in the first post of this thread.
Can't tell you where to get roms. It's against the rules.
I used clrmamepro and a set of rollback roms to roll the rom back.
(pretty sure it says what version you need on the page linked or in the readme file)
This is for using a PC wheel. It adds modern PC game type ffb, nothing like what the game originally had.
If you want to use the original wheel and the shaker motor, as it originally functioned, you'd use MAME and Howard Costa's MAMEHooker. (also linked in first post)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version