Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Links to Driving Cab projects  (Read 48097 times)

0 Members and 1 Guest are viewing this topic.

BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Links to Driving Cab projects
« on: February 24, 2013, 04:55:34 pm »
Build threads go in the Project Announcements forum, but we'll keep a directory here.  :)

Post a picture and a link to your driving cab project here.
--OTHER REPLIES OR COMMENTS WILL BE DELETED--
Please post praise or questions in the related build threads.

Here is the old list from the Driving Cab Info thread to get us started.

theCoder's Xcellerator - Xbox based cab


leapinlew's Prepare to Qualify - classic 360 degree standup


Uncle T's rotating 6 panel monster RIP


thagerty's convertible driving/flying cockpit


BadMouth's Redline Virtual On conversion


thesharkfactor's Initial D conversion w/working arcade FFB


gbeef's Outrun Paradise w/G27 & 32" Widscreen LCD


redketchup's Outrun III xbox cab w/32" widescreen LCD



« Last Edit: November 12, 2015, 11:37:51 am by BadMouth »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:March 17, 2024, 01:15:07 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Links to Driving Cab projects
« Reply #1 on: February 24, 2013, 05:09:29 pm »
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

retrorepair

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 252
  • Last login:April 14, 2023, 04:49:58 pm
Re: Links to Driving Cab projects
« Reply #2 on: February 27, 2013, 12:21:37 am »
My old cabinet:



Also on my channel are videos of the new cab (which I still have to finish so I can upload a video).

Thanks for the heads up on the sub forum too badmouth, hadn't noticed it pop up! :)
« Last Edit: February 27, 2013, 12:23:18 am by retrorepair »
My arcade racing setup:
My Youtube Channel: http://www.youtube.com/user/RetroRepair
My Twitter: http://twitter.com/retrorepair

Jollywest

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 288
  • Last login:Yesterday at 05:26:17 pm
Re: Links to Driving Cab projects
« Reply #3 on: February 27, 2013, 04:11:50 pm »
My Sega Model 2 & 3 (PC Emulated) Racing cab converted from a non-working Midway Cruis'n USA machine;



It uses the original Happ FFB wheel with an Immersion Touchsense FFB PCB.

Check out the blog link in my sig for info on it's journey.

BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: Links to Driving Cab projects
« Reply #4 on: February 27, 2013, 06:57:23 pm »
brad808's Emergency Call Ambulance conversion with Sega Rally E-brake

http://forum.arcadecontrols.com/index.php/topic,115186.0.html


BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: Links to Driving Cab projects
« Reply #5 on: February 27, 2013, 10:14:34 pm »
vandale's twin Road Racer 2 conversion:

BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: Links to Driving Cab projects
« Reply #6 on: February 28, 2013, 10:41:30 pm »
aganyte's scratch built Sega Rally

http://forum.arcadecontrols.com/index.php/topic,122462.msg1299962.html#msg1299962



aganyte has created his own interfaces for Happ and Sega wheels.
http://www.gamoover.net/Forums/index.php?topic=20417.0
http://www.gamoover.net/tuto/l2m2-interfacer-un-ffb-et-volant-sega-model-12-avec-un-pc-ou-une-playstation-23

I'd like to see how the happ one compares to a servo amp at some point.

isamu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 807
  • Last login:Yesterday at 02:38:32 am
  • I'm a llama!
Re: Links to Driving Cab projects
« Reply #7 on: March 01, 2013, 05:55:48 am »
Here is my "Arcade Racing" setup I posted a couple years ago showcasing my ECCI 7000 wheel.




BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: Links to Driving Cab projects
« Reply #8 on: April 12, 2013, 09:16:55 am »

BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: Links to Driving Cab projects
« Reply #9 on: May 21, 2013, 10:54:29 am »
ScottoKong's Cruisin' USA conversion

This thread has just about all the information on the Happ/Servo Amp hack combined in one place. (and he did not experience the wobbling issue)
See reply #38 for a summary.

http://forum.arcadecontrols.com/index.php/topic,115133.msg1220257.html#msg1220257

Andypc

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 105
  • Last login:March 09, 2021, 11:25:45 am
Re: Links to Driving Cab projects
« Reply #10 on: August 04, 2013, 03:20:50 pm »
Here is a couple of videos of my set-up. I did the driving cab a few years ago. The metal work was all stripped and powder coated. The plastic sides were painted and new artwork applied. I fitted new Sanwa PFX monitor's with new surround and dashboard plastics purchased direct from Sega.  They have modified Logitech G25 wheels working with the cabs original pedals.


rockyrocket

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 372
  • Last login:January 01, 2019, 02:13:03 pm
Re: Links to Driving Cab projects
« Reply #11 on: December 27, 2013, 04:59:41 am »
I will throw my Cabaret on here as something different.



arcadepcnut

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 273
  • Last login:August 15, 2019, 12:03:07 pm
  • Warhammer 40K, you should try it.
    • BREAKTIME
Re: Links to Driving Cab projects
« Reply #12 on: March 02, 2014, 02:14:34 pm »
Hello. Godaddy stole my domain a year or so ago. So I got a new domain name. My driving cabinet has been updated quite a bit in the 10 years since I built this website. This website is a picture of my old cabinet. However it has been modified quite a bit! im using all REAL arcade controls now. arcade steering wheel with force feedback motor. arcade shifter and pedals. I will update this site with some more current pictures of my build if anyone is interested and move this site to archive. I just wanted to get my site back visible.

The cabinet looks basically the same as it did but now all the buttons that normally would be on the wheel are on the console because the wheel turns! the buttons moved when I turned the wheel so I made it hard on me to hit the boost since the boost moved. I kinda like the buttons being on the dash. But some may disagree. this also has a 32" TV in it now. the power outage a couple years ago blew the 27" and I replaced with a sony 32" that I decased and wedged into the cabinet. I will tell you more about it later if there is any interest.

http://www.biontek.com/breaktime/index.htm
« Last Edit: March 02, 2014, 02:33:46 pm by arcadepcnut »

jackiabu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 322
  • Last login:September 04, 2020, 02:55:25 pm
    • http://jackiabu.blogspot.com/
Re: Links to Driving Cab projects
« Reply #13 on: March 03, 2014, 10:56:51 am »
« Last Edit: March 04, 2014, 02:21:13 pm by BadMouth »

BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: Links to Driving Cab projects
« Reply #14 on: July 08, 2014, 04:08:05 pm »

flash951

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:May 18, 2016, 04:22:39 pm
  • You should use CRT display
    • remimedia
Re: Links to Driving Cab projects
« Reply #15 on: August 17, 2014, 05:30:30 pm »
« Last Edit: August 17, 2014, 07:01:09 pm by flash951 »

R083RT0

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:June 22, 2023, 01:09:46 pm
    • my videos
Re: Links to Driving Cab projects
« Reply #16 on: August 30, 2014, 08:23:08 am »
my Racing Cab build from scratch...
from 2011 till 2013 I played xbox360 racing games with my cabinet, since 2013 I use my pc to play racing games  :)




« Last Edit: August 30, 2014, 08:36:43 am by R083RT0 »

Sp3c7r3

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:March 09, 2016, 02:09:52 am
Re: Links to Driving Cab projects
« Reply #17 on: November 26, 2014, 06:53:18 am »
I made a pretty simple, but effective and clean looking, setup. The wheelstand is secured to the floor using strip wires. Seat has all the regular adjustment functions, but in it's "neutral" position it fits me perfect.

It consists of:
wallmountet 32" Samsung LCD
Wheelstand Pro
Logitech G27
i3 HTPC
Racing Seat

build process:








and the finished result:

terminator2k2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:March 08, 2024, 05:46:40 pm
Re: Links to Driving Cab projects
« Reply #18 on: November 12, 2015, 03:31:45 pm »
Heres a link to my Daytona USA 2 Cab conversion :

Daytona 2 Cab conversion



Still work in progress 95% complete
« Last Edit: May 30, 2016, 02:07:03 pm by terminator2k2 »

ant2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 227
  • Last login:March 07, 2024, 08:30:50 am
Re: Links to Driving Cab projects
« Reply #19 on: March 01, 2016, 06:19:52 am »

ant2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 227
  • Last login:March 07, 2024, 08:30:50 am
Re: Links to Driving Cab projects
« Reply #20 on: March 01, 2016, 06:21:03 am »

MTPPC

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 535
  • Last login:November 26, 2021, 02:25:46 pm
Re: Links to Driving Cab projects
« Reply #21 on: August 05, 2016, 12:04:27 am »
Crazy Taxi M2/MAME A-PAC P4-3.4 29" LCD 1360x768

http://forum.arcadecontrols.com/index.php/topic,151448.0.html

« Last Edit: February 02, 2017, 09:45:49 pm by MTPPC »
Pinball and Video Arcade Repair in Billings, MT USA
http://pinballmd.com/

segaturbo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:June 04, 2023, 12:31:01 pm
  • SEGA FOREVER
Re: Links to Driving Cab projects
« Reply #22 on: February 18, 2017, 06:14:44 pm »
heres my daytona 2 cab on you tube running mala frontend and l2m2


mike5im5

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Last login:December 23, 2021, 03:22:21 pm
  • I want to build my own arcade controls!
Re: Links to Driving Cab projects
« Reply #23 on: March 09, 2017, 01:10:40 pm »

gstav

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 212
  • Last login:March 08, 2024, 09:42:01 am
    • forum.arcadecontrols.com/index.php/topic,157861.0.html
"One coin to rule em' all"

Marcoqwerty

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 123
  • Last login:March 14, 2024, 02:46:08 pm
Re: Links to Driving Cab projects
« Reply #25 on: November 16, 2017, 10:31:34 am »
SPEEDrive is a Marcoqwerty Project, based on a Jamma coin-op with inside a pc.

FEATURES:

- Original 25" CRT Monitor (emudriver)
- 360° Wheel - Shifter UP/DOWN with NOS
- Rumble
- CPO Light Button
- 2xLed stripes on the back (output controlled)
- Pedal with micro and pot
- 2.1 audio system + 100w Subwoofer

EMULATORS:

- Mame
- Demul (MODEL 2)
- Supermodel (MODEL 3)
- PC Custom Games

« Last Edit: November 16, 2017, 11:37:06 am by BadMouth »

smokey133

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:December 19, 2018, 08:21:45 am
  • I want to build my own arcade controls!
Re: Links to Driving Cab projects
« Reply #26 on: February 14, 2018, 05:37:00 am »
My driving cab

marcux

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:September 08, 2020, 12:45:17 am
  • I want to build my own arcade controls!
Re: Links to Driving Cab projects
« Reply #27 on: December 18, 2018, 09:39:23 am »
My newly Finished driving cabinet. All I have is youtube video at the moment.


smokey133

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:December 19, 2018, 08:21:45 am
  • I want to build my own arcade controls!
Re: Links to Driving Cab projects
« Reply #28 on: December 18, 2018, 04:06:13 pm »
Nice!!Awesome work!

fiatbravodriver

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:January 08, 2021, 09:22:44 am
Re: Links to Driving Cab projects
« Reply #29 on: July 17, 2020, 02:09:17 pm »
Hi,

Inspired by the great people of this site I had a go.


I made a Video Showing the whole process.

The link is here if anyone wants to see it.



Take Care.

J




CboneCapone

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 12, 2023, 02:29:43 pm
  • I want to build my own arcade controls!
Re: Links to Driving Cab projects
« Reply #30 on: January 16, 2021, 08:44:36 pm »
Here is what I'm calling my old racing cab - I'm about to get rid of it to make room for a few more.  Nothing crazy here - I've had a few different monitors / TVs over the years, had the g27 since 2010, got the seat out of a junkyard, has some lights underneath but nothing too blingy.

Aurelien

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:March 10, 2023, 11:00:02 am
  • I want to build my own arcade controls!
Re: Links to Driving Cab projects
« Reply #31 on: March 05, 2023, 02:27:25 am »
Does this count if it does not look like a classic arcade cabinet?

Features:
- 2 directions
- 1 accelerator / brake lever
- 1 start button
- also works on snow