| Main > Main Forum |
| Can Novus polish be used on polyurethane? |
| (1/1) |
| javeryh:
I've got a finished piece of wood I want to make even smoother. Will it work? |
| Q*Bert_OP:
Try it on a hidden area. You want to cut some texture down? You may have best results with a random orbital buffer. |
| bratwurst:
I've always used multiple coats of poly and then ultra fine steel wool. |
| javeryh:
--- Quote from: bratwurst on August 27, 2010, 09:20:43 pm ---I've always used multiple coats of poly and then ultra fine steel wool. --- End quote --- Is the steel wool the last step or do you always put one last coat of poly on top? |
| MikeDeuce:
Is the desired result to also have a less glossy finish? That's typical of using #0000 steel wool towards the end of the process. If you want ridiculously flat, deep, high gloss finish, you might find this article helpful*: http://ironvulva.com/temp/fwwHiGloss.pdf *I kind of find that to be overkill,though... I'm always happy with the look of General Finishes Arm-R-Seal padded on over several thin coats (as a top coat for their Seal-A-Cell). |
| Navigation |
| Message Index |