| Main > Main Forum |
| The best trackball of all! |
| << < (2/4) > >> |
| gryhnd:
X-gaming: $60, plug and play. Not a translucent ball though. The way I mounted mine, there are no through bolts, etc: http://forum.arcadecontrols.com/index.php?topic=101714.msg1075974#msg1075974 http://forum.arcadecontrols.com/index.php?topic=101714.msg1075970#msg1075970 |
| javeryh:
--- Quote from: gryhnd on August 27, 2010, 04:04:41 pm ---X-gaming: $60, plug and play. Not a translucent ball though. The way I mounted mine, there are no through bolts, etc: http://forum.arcadecontrols.com/index.php?topic=101714.msg1075974#msg1075974 http://forum.arcadecontrols.com/index.php?topic=101714.msg1075970#msg1075970 --- End quote --- I just read that thread the other day and FINALLY got around to mounting my trackball from underneath like you did. I bought the metal strapping but haven't screwed it in place yet - I'm hoping Sunday... |
| idsane:
Thanks for the replies guys. I wasn't aware of the X-arcade version so I will have to do some research into that one. Can you use the mounting plate for that one too? I like yours also severed; didn't know the ultimarc could be mounted that cleanly. Does the resolution or smoothness of spin differ from any of these models? |
| RandyT:
--- Quote from: idsane on August 31, 2010, 01:23:46 pm --- Does the resolution or smoothness of spin differ from any of these models? --- End quote --- If resolution (and very bright lighting) is important to you (better function at the desktop and with PC games meant for a mouse) then there is only one arcade trackball which currently offers this functionality as a standard feature. Unfortunately, it's out of stock at the moment, due to manufacturer backorder. RandyT |
| Afterburner:
--- Quote from: idsane on August 31, 2010, 01:23:46 pm ---Thanks for the replies guys. I wasn't aware of the X-arcade version so I will have to do some research into that one. Can you use the mounting plate for that one too? I like yours also severed; didn't know the ultimarc could be mounted that cleanly. Does the resolution or smoothness of spin differ from any of these models? --- End quote --- No mounting plate required. Just some long bolts or screws. I routed out the underside of my CP just a bit and the whole trackball housing is mounted up to it. It's completely enclosed. It is kinda large, but as you can see from my CP above, I have dual trackballs and still had plenty of room for buttons and two rotary 8-ways. |
| Navigation |
| Message Index |
| Next page |
| Previous page |