| Main > Main Forum |
| Once again, about buttons |
| (1/20) > >> |
| unska:
Hey, I'm new to the forum and to the whole scene actually. I'm curious to know if there's something I missed on my "Wanted Buttons" -list below; player 1 - u360 - 6 buttons for playing - 1 player button - coin button player 2 - u360 - 6 buttons playing - 2 player button - coin button admin - pause / play button - exit button - save button - load button pinball - 4 buttons other - ipac 2 --------------------------------- Do you know if the "Push Button Graphic Inserts" from GGG (Link) work with the basic happ buttons? If no, then is there a place where I could buy ones that could be inserted on top of those or either the ChromaLite buttons from GGG. Oh and if I order the stuff from GGG and Ultimarc, will I have to buy some sort of wires or are they included? If no, then how much do I need to buy it? Is there anything else I have to buy to hook them up? |
| oyama82:
you will need cables with harness,you can buy from electronics shops also I would buy 7 pushbuttons for each player,not six(so you can play both neogeo and street fighters easily) as for the joysticks I dont agree to buy u360s but its your decision |
| bpark42:
--- Quote from: oyama82 on August 22, 2010, 08:08:17 pm ---as for the joysticks I dont agree to buy u360s but its your decision --- End quote --- Everybody is entitled to their opinion, but if you are going to post something like this it would probably be more useful to the OP if you said why you don't agree... Anyhow, to the OP, You have a good basic setup there. Different people have different priorities in terms of admin buttons. Don't forget you can always use the shift functionality of the ipac for additional admin functions. I don't have any experience with the inserts, but it looks like they are designed to fit in a standard happ-like translucent button. You asked about "basic" buttons, so if you mean the standard non-translucent one then you will probably have a hard time seeing the inserts ;) As for wiring, The u360's just connect straight to usb (pretty sure they come with the necessary cables.) If you want to connect the buttons to the sticks instead of the ipac then you will probably want to buy the harness along with the sticks. Wiring buttons to the ipac is easy enough. Just get some basic 22ish-gauge wire (stranded hookup wire) and some crimp on quick-disconnects. If you need the crimp tool as well you can just buy ultimarc's wiring kit. It has all of the above, though depending on the microswitches you use you might need to get some different sized disconnects. |
| unska:
Thank you for the replies. Is the 7 button required on the classic streetfighters or only in the SF4? As I am not going to play the SF4 on the mame. Do you have any layout for the 7 button system? This KNIEVEL KUSTOMS guy has some nice buttons with labels on them, do you know how they are done? |
| mmb:
You can get the button vinyl from Pongo in his Buy/Sell/Trade thread http://forum.arcadecontrols.com/index.php?topic=64645.0 |
| Navigation |
| Message Index |
| Next page |