Main > Main Forum

Comparison of Vendors (GGG vs Ultimarc)

Pages: << < (15/15)

RandyT:


--- Quote from: Ginsu Victim on August 13, 2010, 02:06:58 pm ---Word of warning: You can't drop it straight in as a replacement. The hole pattern is different.

--- End quote ---

Yes, it has the Seimitsu-style mounting plate, which is narrower.  On the bright side, however, it's a smaller footprint.  I've been thinking about adapter plates, but my laser metal cutting source just went "belly-up"...not enough work to pay for the upkeep on his machine  :'(.  It's not too hard to adapt one for existing holes, though.  If you have carriage bolts, just leave them in place, use the hardware in our joystick mounting kits, and turn the True4 sideways so it fits between the bolts.  You can pretty much do the same for existing under panel mounting methods.

New installations are a little easier though, as there is no existing hardware to consider.

RandyT

Ginsu Victim:

I was actually planning on doing the exact method you mentioned.

Great minds...   ;D

Pages: << < (15/15)

Go to full version