Main > Main Forum
Tekken Tag -> Mame Cabinet?
rivacom:
Ok so I got it to show up finally after swapping out the Geforce mx 440 for the ATI 9800 Pro card. But the lowest resolution I seem to be able to go is 640x480, which still seems off for the arcade monitor. Any suggestions on what resolution will probably look best?
Malenko:
for windows ? I think its like 640x240 or some odd resolution
shan1784:
I basically did the same thing you are doing but with a Tekken 1 cab... It was alot of work to get it all setup but once it is done you will love it...
Just a side note, not that it's going to make much difference now as it seems you are well on your way but, the computer you are running if older probably won't do a very good job of running any of the Tekken series roms... I am using a P4 2.6 Ghz CPU with 2 gig of RAM and the arcadevga card as well and am already upgrading to a newer system... I did test Tekken Tag on an AMD Athlon 64 X2 3000+ which is a 3Ghz dual core chip and it ran pretty decent but not flawless...
Just an fyi to something to expect when you fire up Tekken Tag.. It probably won't run perfect but there is a way to fix it...
Also for the coin buttons.. I didn't wire this to my JPAC.. I wired the buttons to the terminals on the coinbox which should already be wired to the JAMMA harness... This will save you a couple of spots on your JPAC if you were going to wire to a screw down terminal...