| Main > Main Forum |
| Tekken Tag -> Mame Cabinet? |
| << < (3/4) > >> |
| Malenko:
--- Quote from: rivacom on August 18, 2010, 02:15:59 pm ---Just so I'm not missing anything, Do I need to buy something extra for this? Basicly The machine has 5 buttons and a start button for both players. I will probably add a 6th button and possibly a coin button to each player. The extra two per player your saying I can wire in the j-pac, but that leave's 3 buttons for the kick harness, so I guess I need to figure out what this is and or if I have to purchase it. --- End quote --- No there is a screw terminal on the JPAC. All you will need to do is rewire the buttons from Tekken's Kick harness to the JPAC. The kick harness is a little connector that goes into the tekken board for the extra kick and tag button. You can either cut the harness (I wouldnt) or just run new wires (I would) |
| rivacom:
Is this going to be a problem if I rewire the extra buttons, when I pick up a jamma switcher down the road? How will I make sure the jpac see's every button then? |
| rivacom:
So I got my Jpac and went to install it, turned on the PC and loaded it to 640 480, rebooted and I can't seem to pick up the pc on the arcade monitor or lcd screen. Is there a default resolution I should be shooting for? It's a old dell computer with geforce mx 440 card in it. The controls seem to work great, just trying to figure out the monitor. |
| Malenko:
you running soft15 or an arcadeVGA? |
| rivacom:
I loaded soft15 on, loaded the 15hz and rebooted and nothing came back. I have to grab a keyboard from work tonight to try safemode(my g15 doesn't seem to do any bios hotkeys) but maybe I choose something wrong? |
| Navigation |
| Message Index |
| Next page |
| Previous page |