| Main > Main Forum |
| Does anyone know ... |
| (1/1) |
| Jasonmm:
Does anyone know what this stuff is called and where I could buy it in bulk , ie .. by the foot ? RETAINER MARQUEE HAPP MAME tm ARCADE JAMMA NEW - http://cgi.ebay.com/RETAINER-MARQUEE-HAPP-MAME-tm-ARCADE-JAMMA-NEW_W0QQitemZ290409126559QQcategoryZ13718QQcmdZViewItemQQ_trksidZp3286.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D6982335450045455209 I am making a 7ft by 4ft arcade marquee wall and thought it would look good between each marqeee , better than electrical tape for sure ... thanks J |
| DeLuSioNal29:
Keep in mind that it's curved on the edges... so it was really only meant to hold one marquee (using 2 pieces on the top and bottom); not 2 at the same time on either side using one piece. If I were you I'd make something out of T-molding that's bigger than the standard 3/4" size. Something like this maybe: http://www.t-molding.com/store/product.php?productid=8&cat=22&page=1 D |
| jholman76:
what I would do is go to a hardware store (big box) and get some right-angle aluminum stock. I got 8ft of it for less than $5 for my marquee retainer. I just primed it with some rustoleum flat black and it fit with my cabinet's motif. You can always paint it another color if you want. if you are doing a mosaic of marquees and want to put retainers in-between you could always double this up and form a "T" shape, but that might be a lot of waste. I didnt check into it, but the stores may have T shaped aluminum stock, or you could use the metal framework that is used for suspended tile ceilings. Or not... whatever... :P joe |
| Navigation |
| Message Index |