| Main > Main Forum |
| Smash Tv sound problem |
| << < (2/3) > >> |
| redfivexw:
Definitely no -5v, i double checked. I will wire that in directly tonight, if anyone knows what that missing wire is, i would appreciate that as well. |
| DeLuSioNal29:
Yep, mine was distorted too before I used the -5v connection. I'm almost positive that's what it is. I'll check my machine tonight when I get home and let you know. In the meantime, I'm going to try to dig up some pics that I sent via e-mail to Bob Roberts (he's a vendor that makes cables and such for boards among other things). Also, did you grab the manual for the PCB? If I recall, there's a typo in there for -5v and where it's connected. I'll look into it. Stay tuned. D |
| Malenko:
--- Quote from: redfivexw on July 21, 2010, 08:09:37 am ---Definitely no -5v, i double checked. I will wire that in directly tonight, if anyone knows what that missing wire is, i would appreciate that as well. --- End quote --- heres the link to the manual, they dont really say what the connector goes to http://pdf.textfiles.com/manuals/ARCADE/S-Z/ |
| DeLuSioNal29:
I dug up the pics (found it in an e-mail) As for the typo in the manual... Found it: The manual has -5v mis-labeled as +5v for pin # 6 on the J2 connector (diagram 3-22 on page 54 of the pdf file) but correct in the other diagrams. Also, check your ribbon cable, I can't tell, but it looks like you may have it connected wrong. Make it match my pics above. These pics were taken from a working setup. DeLuSioNaL29 |
| redfivexw:
BINGO! GOOD LUCK, YOU'LL NEED IT!! that is what i heard after i connected the -5V. Thanks everyone, now i just have to find those pleasure domes! ;D |
| Navigation |
| Message Index |
| Next page |
| Previous page |