| Main > Main Forum |
| Loud Buzzing From Speaker With 60 in 1 Jamma |
| << < (3/4) > >> |
| HaRuMaN:
--- Quote from: Darren01274 on July 08, 2010, 09:58:13 am ---how do you do that --- End quote --- I was kidding. Of course, it would work, but it would be way more trouble than it's worth. What kind of speaker do you have hooked up? Is it amplified? |
| Darren01274:
Arcade Speaker. Jamma connector and board. Jamma Speaker Wires to Arcade Speaker. |
| HaRuMaN:
Have you tried a computer speaker hooked up to the headphone jack on the board? That's what I did on mine, no hum. |
| Darren01274:
I tried headphones no hum or buzz just audio. what speakers would you recommend. And wouldnt PC Speakers need to be plugged in to mains if i used the line socket |
| BobA:
They are usually AC powered but some come with an adapter or wall wart and these can be replaced by DC inside the cab if they are 12V. If not 12V then not worth the work to replace a 9V with a regulator from the 12V supply. The line power can be picked up at the same point as the AC for your arcade supply or PC supply depending on what you are using. |
| Navigation |
| Message Index |
| Next page |
| Previous page |