Main > Project Announcements
Metal Slug Lowboy *new update*
XNIF:
ok update, test fitting the panels:
used construction glue for the bottom.
A control panel is missing :)
from the inside:
Next is test fitting the TV. Then when all panels are done, í'll start with the C.P.
XNIF:
And some more progress. Made the bottomplate and the backside. And i started to with the marqueeholder.
I left the bottom frame uncovered for the wheels. It seemed more stable than mounting the wheels with OSB plate in between.
muppets4:
You're going in a great pace. I like the shape too. And I see you're getting help from "Duke Jan"
Why did you choose that wood? It will be hard to get it smooth.
XNIF:
--- Quote from: muppets4 on August 16, 2010, 03:39:04 pm ---You're going in a great pace. I like the shape too. And I see you're getting help from "Duke Jan"
Why did you choose that wood? It will be hard to get it smooth.
--- End quote ---
I cannot do anything without "The Duke", too much shaking of the hands :) That is how i keep pace! Just an hour here, and another two hours there. :cheers:
About the wood... uhm.... well i'm laminating it so it does not have to be smooth. But you are right, i should have used MDF.
We'll just see how this holds. Worst case scenario: i'll cut the two sides again out of MDF. But this OSB is not that bad.
XNIF:
Ok new update! Fitted the screen it's starting to look cool. It's a slim fit. I like big screens in little boxes :P
It was almost impossible to lift it by my own and a friend helped me out. Thanks a lot Mayko! Really happy now :)
Did i say it's a close fit? Angle is 30 degrees.
Just enough room :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version