Main > Main Forum
Wiring 60 in 1 and LCD
Darren01274:
Hi I have mounted a monitor in my cocktail cab and ordered my 60 in 1 jamma board. I have an arcade power supply.
My questions are. Is there a way to wire the LCD screen up and Jamma board to one plug socket or would I need to Plug.
Also is there a wiring diagram to wire the jamma board to power supply.
RayB:
Just use a PC power supply and hook up your LCD to the board's PC monitor output.
BobA:
Jamma wiring
The above shows the jamma connections for power and all others. Your 60 in 1 board can be connected to a standard 4 pin power connector and does not have to receive power via the jamma connector. As RayB said a PC power supply and your regular VGA connection is the easiest way to go.
BadMouth:
The half arse way that I did this in one of my megatouch machines was to run an extension cord inside the cab, then plug the monitor & power supply into the extension cord.
I'll admit it's a bit ghetto, but there is only one cord coming out & it looks 100% OEM. ;D
Darren01274:
Thanks guys think I will get a PC power supply. AT or ATX?
Cheers
Darren