| Main > Main Forum |
| Modelling material for cabinet shell models? |
| (1/4) > >> |
| Turnarcades:
I'm looking to create some rough scale models of our product range for taking to shows etc. but I'm struggling to think of a cheap, rigid material that won't require loads of time to put together and won't crush or damage easily. See I could do them in wood but that would take too long, whilst normal card will be too flimsy. I have looked at corrugated plastic sheets but they are very pricey. Can anyone suggest a lightweight tough material that would work? |
| newmanfamilyvlogs:
http://sugru.com/ Might not be exactly what you're looking for.. but it's a remoldable plastic-y material. Edit: Somehow I read 'rough' as being a smaller scale. Thus this material is wholly inappropriate. |
| BobA:
Baltic birch plywood is used very often for mini cabs and models. It is thin and has more layers then regular plywood. Baltic Plywood |
| Turnarcades:
Thanks for the suggestions, but these are a little more involved than I need. They aren't proper scale models; they will just be made to the overall scaled shape of the cabinet to give people an idea of the various cabinet proportions, without the need to build a whole rack of demo machines that we may not have room for. I want to build a few about a foot high, but ideally I need something more craft-like that can be cut with a sharp knife or similar rather than tools, and be put together with a glue gun or staples or something. |
| Bender:
foamboard or gatorboard would work although sheets that big get a bit pricey |
| Navigation |
| Message Index |
| Next page |