| Main > Main Forum |
| Help with diagnosing JAMMA video glitches. |
| << < (3/3) |
| Malenko:
--- Quote from: Billy_Goatfeet on June 29, 2010, 10:47:16 pm --- So Street Fighter is still in the same shape as before, I pulled all the roms that I could and reseated them. No change. I did the same for NBA Jam and it still only sends a flickering black signal. Two out of four ain't bad. Thanks for you help everyone. Anyone need parts for SF2 or NBA JAM? :cheers: --- End quote --- any sound on NBA Jam? Does it boot if you dont hook the sound board up? I need an extra power cord and "mini ide cable thingie" from NBA Jam if you're getting rid of stuff =) Sound pot too if ya got it. |
| Q*Bert_OP:
On NBA Jam...make sure the ribbon cable is put on the correct way on both sides...red stripe goes to pin 1 on both boards. If nothing, unplug the board, remove the battery, wait at least 30 seconds, apply power to board again. Corrupt CMOS memory can cause the board to do strange things. On SF2, it's a sandwich of 2 boards, right? Separate them, then reconnect. |
| Navigation |
| Message Index |
| Previous page |