| Main > Main Forum |
| Windows 7 (x64) - Increase Mouse Polling Rate (anyone done it?) |
| << < (2/2) |
| kronic24601:
@ RandyT Thanks for the comment, I personally haven't played a lot of the older games in their actual setting, but I was reading that Wiki on the subject and it implied that things are more "accurate" with a higher poll rate. I guess this may not be the case. Thanks for letting me know. The "jittery" I mentioned was related to a poor performance in arkanoid, I didn't really mess with the MAME settings, because (as I mentioned above) I assumed this was the fault of the polling rate. I'd test out the MAME settings and let you know if I have problems. Thanks so much! |
| RandyT:
--- Quote from: kronic24601 on June 23, 2010, 11:56:02 pm ---@ RandyT Thanks for the comment, I personally haven't played a lot of the older games in their actual setting, but I was reading that Wiki on the subject and it implied that things are more "accurate" with a higher poll rate. I guess this may not be the case. Thanks for letting me know. The "jittery" I mentioned was related to a poor performance in arkanoid, I didn't really mess with the MAME settings, because (as I mentioned above) I assumed this was the fault of the polling rate. I'd test out the MAME settings and let you know if I have problems. Thanks so much! --- End quote --- Heh. If you haven't adjusted it, the sensitivity is much too high and that's the cause of the "twitchy" movement. Try setting the sensitivity down to 40 and go from there. RandyT |
| Navigation |
| Message Index |
| Previous page |