Arcade Collecting > Pinball
VND acting up
LLUncoolJ:
I do believe they were, buy I've had about 40 beers since. Let me check it again tonight.
--- Quote from: pinballjim on July 19, 2010, 11:36:48 am ---Feature lights, bonehead, what are those doing? These are the inserts that light up and flash and put on a show for you.
--- End quote ---
You'd better watch it or I'm not gonna stick up for you anymore. :'(
EDIT: If they are lit, then what? Trying to save a step here.
LLUncoolJ:
Thanks PBJ, I'll check into it. I got busy last night working in the garage and forgot to fire up the pinball. I'll tie a string around my finger to remember tonigt.
shardian:
There's no magic answer in pins. You have to check voltages/fuses before we can tell you anything else. And yes, you power supply voltages are off/missing from the way you have described it- specifically +5 for logic. No/low +5 = no boot up, no DMD.
JeepMonkey:
FWIW, I saw a pinball repairman working on a Simpsons that would reset when both flippers were hit and he was looking at the rectifier as the cause.
LLUncoolJ:
Fired it up last night to see what the lights were doing and of course it is working...sound, lights, DMD. But start to play and it resets. Started a game...fine, hit both flippers at once....reset. Then it reset again about a minute later by itself.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version