Main > Main Forum
Extended Shaft for JLW in wood, where to buy?
(1/3) > >>
laggerific:
I have a couple of JLW-TM sticks that I plan on moving to a new Quad CP I'm putting together out of MDO.  I'm now trying to find extended shafts to use here, as well as in the J-Stik I'm getting for this CP.  I'm also using those invisible joystick mounts, so I don't want to route into the wood, if I can help it.  Anybody try these?

http://www.arcadeshop.de/Own-Label-Shaft-Extender-JLW-TM_853.html

Would something like this be compatible with the JLW?

http://www.etokki.com/LS-32%20Shaft%20Extender

How long is the stock JLW-TM shaft? 
Blanka:
Why don't you want to route in the wood? It's more than shaft length. The play becomes different if the shaft is very long. And even without routing, you can always use 2 layers of wood with different holes in it that combine to 18mm or so.
laggerific:
 The CP face is 3/4" and the invisible mounts require .4", and with my plexigless eating 1/8" from the CP, It leaves me with .6" left of wood.  I can only route maybe .15" comfortably, and I'm not sure that's going to be enough. 

I can't find any info on the length of the Sanwa JLW-TM stock shaft...any pointers would be appreciated.
Encryptor:
The U360 is based of a JLW stick. divemaster sells the longer shaft here in his B/S/T thread and on his website. The shaft is 10mm longer than the stock shaft.

http://forum.arcadecontrols.com/index.php?topic=47066.0

http://arcadeemulator.net/

Encryptor
Franco B:
Just FYI, IIRC the upper shaft diameter of the extended shafts is larger than the stock ones so your dustwashers will not fit without making the bore larger.
Navigation
Message Index
Next page

Go to full version