| Main > Main Forum |
| Control Panel Slant Question |
| << < (2/2) |
| syph007:
I did a rise of 1 inch over 1 foot... whatever angle that works out to. Bit of advice.. the taller you are the more painful it is to play on a steeply angled panel. |
| Desolis:
Thanks for all the advice guys, I decided to go with a 1 inch over one foot as well. I'm trying to keep the CP about 24X12" so I figured that would be enough. I'm relatively short. :) |
| ragnar:
--- Quote from: syph007 on June 04, 2010, 01:21:42 pm ---I did a rise of 1 inch over 1 foot... whatever angle that works out to. Bit of advice.. the taller you are the more painful it is to play on a steeply angled panel. --- End quote --- 4.76 degrees. Did hte math just now because I am planning my cabinet. Cutting starts tomorrow. I think I am going with a slight, almost unnoticeable angle. |
| SephYuyX:
I did mine 1" as well, over like uh, a foot or so. |
| ragnar:
Right now, my rough plan is to do about 1/2" over 10 inches. I'm of the less is more school of CP slant. |
| Navigation |
| Message Index |
| Previous page |