I finally got back home from a short business trip and I found my UltraLux Pushbuttons from Andy!
On the RGB Ultralux's the wiring can get in the way of the plunger that connects to the switch.
Sometimes the little switch will press down all the way sometimes not, the plunger or "foot" of the pushbutton makes contact with the wiring and prevents a good contact.
So here is my tip for the RGB Buttons...First my mistakes
I tried to Split the wires in pairs around the bayonet...didnt work too well but better
Next I was a little more drastic.. Mistake Number Two
I clipped the "foot" off.
So far so good right?
Ok maybe not, the button kind of lays sideways:
Finally I decided Hmmm we are not using the Male connectors on the side I wonder if I can pry them off:
It makes it much easier to gently pry the connector out while it is within the button.
So far so good...and the final result!
The cables are out of the way!
I hope this will help the next guy.