Main > Main Forum
Andy, where are the Ultimarc Aimtrack guns?!
Cananas:
Try to setup your Aimtrak with the default values (there is a button in the Aimtrak Utility for this).
After update of the firwmware, which version do you have? 1.3, or the Aimtrak says you have the older version?
helpmebuild:
--- Quote from: Cananas on July 01, 2010, 02:54:11 am ---Try to setup your Aimtrak with the default values (there is a button in the Aimtrak Utility for this).
After update of the firwmware, which version do you have? 1.3, or the Aimtrak says you have the older version?
--- End quote ---
I have tried that as well. It says I'm using 1.3 still. The problem is..I always was. I only attempted the update as it prompted me to after I finished my calibration and pressed the side button on the gun.
Once the update was finished it went through the windows new hardware detection process which is when it seemed to have screwed up. I am completely clueless on how to fix this. I've done pretty well anything and everything I know how with no result.
Would downgrading the software help, and if so..I cant roll back drivers so would I need to uninstall everything and go back in and install say 1.3..then try and update/. If so...does anyone have the 1.2 files and installer, or any earlier version for that matter?
Cananas:
--- Quote from: helpmebuild on July 01, 2010, 08:59:20 am ---I have tried that as well. It says I'm using 1.3 still. The problem is..I always was. I only attempted the update as it prompted me to after I finished my calibration and pressed the side button on the gun.
--- End quote ---
This is strange. Be aware that the last version of the firmware is 1.3. There is no firmware 1.4. The Aimtrak Config Utility is v1.4, and includes the firmware update 1.3.
--- Quote ---Once the update was finished it went through the windows new hardware detection process which is when it seemed to have screwed up. I am completely clueless on how to fix this. I've done pretty well anything and everything I know how with no result.
--- End quote ---
To upgrade the firmware, the Aimtrak config utility uninstall the mouse and joystick device and install a new alternate one (don't know which at this moment) to enable the firmware upgrading. After updated, this alternate device is uninstalled and installed again the real mouse and joystick device.
--- Quote ---Would downgrading the software help, and if so..I cant roll back drivers so would I need to uninstall everything and go back in and install say 1.3..then try and update/. If so...does anyone have the 1.2 files and installer, or any earlier version for that matter?
--- End quote ---
I suggest you e-mail Andy with this problem before doing something else...
rchadd:
--- Quote from: AndyWarne on June 20, 2010, 05:32:42 pm ---
We have only ever really had one product which didnt sell, which is the U-HID G (The version of the U-HID with accelerometer on board). The reason for this is we strayed from the market area we know about. This was produced with two markets in mind, pinball builders (for nudge) and musicians, especially guitarists, for an effects unit. neither markets are really there. This does not really matter as the development costs of this board were tiny, so we just took the hit.
--- End quote ---
i am sure the digital pinball market will become much more popular in the future as more LCD TVs become cheaper and more available secondhand.
Does the U-HID G work well with visual/future pinball?
AndyWarne:
--- Quote from: rchadd on July 02, 2010, 06:42:22 am ---
i am sure the digital pinball market will become much more popular in the future as more LCD TVs become cheaper and more available secondhand.
Does the U-HID G work well with visual/future pinball?
--- End quote ---
I believe so yes, but I have had very little feedback on this.