| Main > Main Forum |
| Tilted CP and CP depth |
| (1/2) > >> |
| RandomCitizenX:
Similar to my question about tilting a display, what do you guys think would be a comfortable degree to tilt the CP? I am also trying to figure out how deep to make my cp for a two player, six buttons each with a u-track in the middle? I was looking at 10 inches, but am still not sure if this is enough. |
| dawolv:
-Tilting: I hear 5-10 degrees ... seems right to me. -Depth: What I did was print out all the layouts from here then cut them out (Joystick, buttons, then a trackball that I just drew out) and put them on our kitchen counter (36inch high) and had my wife and I standing side by side to test the comfort level at the same time. Hope it helps ;) |
| DashRendar:
The back of my CP is raised 1 1/2 inches above the front, which gives it a perfect tilt. This will vary though based on the depth of your CP. |
| dawolv:
Here it is: And the Link to the breakdown: About halfway down the page |
| RandomCitizenX:
Thanks for all of the information. After playing around with a few things and I have settled on a 5 degree tilt with a 10 inch CP depth. This may not prove to be the best, but I have a really good feeling about it |
| Navigation |
| Message Index |
| Next page |