Main > Main Forum

Replacing U360 shaft & spring

Pages: << < (3/3)

edge10:

Thanks for the replies.

  Sometimes I can be such a dope.  :-[

kronic24601:

You are trying to replace the shaft right? Then why are you removing the top metal portion anyway?

Just remove the bottom PCB. (there are 4 screws)
Take off the magnet (with your hand)
Pop off the eclip (on the bottom portion of the joystick)
Pull off the spring assembly (replace spring if desired)
Pull shaft up through top.

You shouldn't have to take off the top metal plate at all.

edge10:

I was trying to replace the spring (want the stiffer one).

Thank you for the thorough instructions, maybe they can save someone else from my mistakes.

It looks like I'm in the market for a new shaft now...  :banghead:

Pages: << < (3/3)

Go to full version