| Main > Main Forum |
| U360 Spring Options and Observations |
| << < (8/14) > >> |
| I/O:
I just tried this and it worked. It shows up as 0205 in 'hardware Ids', as directed by the information on the Ultimarc page. I have not extensively tested the functionality of the stick, but directions do function. |
| kegger:
Ok so I have tried this many many times and every time I get this error after the firmware upgrade as I try to reload a map, error opening device, failed to program device, UltraStik #3 Error 0x0: Failed to transmit data to UltraStik. Does anyone else get this and is this normal as Andy doesn't mention it. To gain control over the joystick I have to unplug it from the usb then put back but I'm wondering if at that point it some how reverts back to the last firmware? As I get this error every time I can't load a map after and I can't change Id's because ultramap doesn't see the joystick anymore after trying to load the firmware.... :dunno When I go through the steps to run the firmware upgrade it tells me it was sucessful but then Ultramap wont talk to it anymore till I pull the plug on the USB to the Joystick. |
| I/O:
I think the process I went through was: Ultimarc instructions, re-program stick with map, no response of stick, disconnect and reconnect stick, manual scan for ultrasticks, re-program stick with map. Good to go. I guess the stick needs to be disconnected and reconnected, and manual scanned in Ultramap before it can be re-mapped and then active. |
| SammyWI:
Kegger - I get the same error when I try to update. I got the same thing when I updated to 2.4 and that worked fine when I just unplugged and replugged in the stick. So I thought this was normal. Maybe not. I/O - I tried following your instructions with no luck. It still has 0204 in hardware IDs. |
| kegger:
Ok so I tried this all over again on a win 7 pc, my cab is xp and still have the same problem. So I/O could you attach the firmware file you used that was successful so I could try it? Reason I'm asking as the 2.5 and 2.4 are the same size and this might be the case but for the added shift function I thought it might be a bit bigger than 2.4. This is just a shot in the dark. Thanks Keg :cheers: |
| Navigation |
| Message Index |
| Next page |
| Previous page |