Main > Main Forum

Y-Plus Controller

Pages: << < (4/11) > >>

Hoopz:

If you're wiring buttons, you need the switch harness.  If you're wiring a trackball and/or spinner, you need the trackball/spinner harness.



D_Harris:


--- Quote from: Hoopz on April 24, 2010, 05:51:35 pm ---If you're wiring buttons, you need the switch harness.  If you're wiring a trackball and/or spinner, you need the trackball/spinner harness.



--- End quote ---

?!?

You said that I wouldn't have to re-wire to switch between a spinner game and a button only game.

So in effect, what you're saying is that I need both harnesses attached to the controller in order for it to work alternately with a "spinner" game and "button only" game?

Darren Harris
Staten Island, New York.

Hoopz:


--- Quote from: D_Harris on April 24, 2010, 11:20:41 pm ---
--- Quote from: Hoopz on April 24, 2010, 05:51:35 pm ---If you're wiring buttons, you need the switch harness.  If you're wiring a trackball and/or spinner, you need the trackball/spinner harness.



--- End quote ---

?!?

You said that I wouldn't have to re-wire to switch between a spinner game and a button only game.

--- End quote ---

?!?
You don't.   ::)


--- Quote from: D_Harris on April 24, 2010, 11:20:41 pm ---So in effect, what you're saying is that I need both harnesses attached to the controller in order for it to work alternately with a "spinner" game and "button only" game?

--- End quote ---
I'll answer yes with the caveat that I don't know what you're hooking up as far as the spinner goes so I can't say if it's compatible with the harness or not. 

D_Harris:


--- Quote from: Hoopz on April 25, 2010, 11:54:44 am ---
--- Quote from: D_Harris on April 24, 2010, 11:20:41 pm ---
--- Quote from: Hoopz on April 24, 2010, 05:51:35 pm ---If you're wiring buttons, you need the switch harness.  If you're wiring a trackball and/or spinner, you need the trackball/spinner harness.



--- End quote ---

?!?

You said that I wouldn't have to re-wire to switch between a spinner game and a button only game.

--- End quote ---

?!?
You don't.   ::)


--- Quote from: D_Harris on April 24, 2010, 11:20:41 pm ---So in effect, what you're saying is that I need both harnesses attached to the controller in order for it to work alternately with a "spinner" game and "button only" game?

--- End quote ---
I'll answer yes with the caveat that I don't know what you're hooking up as far as the spinner goes so I can't say if it's compatible with the harness or not. 

--- End quote ---

Spinner compatibility is not an issue.

More importantly, you cannot attach both the "switch" and the "trackball/spinner" harness to the controller at the same time.

Darren Harris
Staten Island, New York.

CheffoJeffo:

I'm pretty sure you can -- they run to two different headers and are two different sizes ...

Pages: << < (4/11) > >>

Go to full version