| Main > Main Forum |
| Y-Plus Controller |
| << < (4/11) > >> |
| Hoopz:
If you're wiring buttons, you need the switch harness. If you're wiring a trackball and/or spinner, you need the trackball/spinner harness. |
| D_Harris:
--- Quote from: Hoopz on April 24, 2010, 05:51:35 pm ---If you're wiring buttons, you need the switch harness. If you're wiring a trackball and/or spinner, you need the trackball/spinner harness. --- End quote --- ?!? You said that I wouldn't have to re-wire to switch between a spinner game and a button only game. So in effect, what you're saying is that I need both harnesses attached to the controller in order for it to work alternately with a "spinner" game and "button only" game? Darren Harris Staten Island, New York. |
| Hoopz:
--- Quote from: D_Harris on April 24, 2010, 11:20:41 pm --- --- Quote from: Hoopz on April 24, 2010, 05:51:35 pm ---If you're wiring buttons, you need the switch harness. If you're wiring a trackball and/or spinner, you need the trackball/spinner harness. --- End quote --- ?!? You said that I wouldn't have to re-wire to switch between a spinner game and a button only game. --- End quote --- ?!? You don't. ::) --- Quote from: D_Harris on April 24, 2010, 11:20:41 pm ---So in effect, what you're saying is that I need both harnesses attached to the controller in order for it to work alternately with a "spinner" game and "button only" game? --- End quote --- I'll answer yes with the caveat that I don't know what you're hooking up as far as the spinner goes so I can't say if it's compatible with the harness or not. |
| D_Harris:
--- Quote from: Hoopz on April 25, 2010, 11:54:44 am --- --- Quote from: D_Harris on April 24, 2010, 11:20:41 pm --- --- Quote from: Hoopz on April 24, 2010, 05:51:35 pm ---If you're wiring buttons, you need the switch harness. If you're wiring a trackball and/or spinner, you need the trackball/spinner harness. --- End quote --- ?!? You said that I wouldn't have to re-wire to switch between a spinner game and a button only game. --- End quote --- ?!? You don't. ::) --- Quote from: D_Harris on April 24, 2010, 11:20:41 pm ---So in effect, what you're saying is that I need both harnesses attached to the controller in order for it to work alternately with a "spinner" game and "button only" game? --- End quote --- I'll answer yes with the caveat that I don't know what you're hooking up as far as the spinner goes so I can't say if it's compatible with the harness or not. --- End quote --- Spinner compatibility is not an issue. More importantly, you cannot attach both the "switch" and the "trackball/spinner" harness to the controller at the same time. Darren Harris Staten Island, New York. |
| CheffoJeffo:
I'm pretty sure you can -- they run to two different headers and are two different sizes ... |
| Navigation |
| Message Index |
| Next page |
| Previous page |