Main > Main Forum
Odd angled molding or corner guard... Where can I get it?
<< < (2/3) > >>
phildo77:
I found this.  It is a little wider than I'd like and the minimum is a box of fifty 10' strips.  Must keep looking...  Need half that width and a lower minimum order....  Something better looking wouldn't hurt either.
Turnarcades:
Try e-mailing a few people from this link:

http://www.kellysearch.com/us-product-68494.html
eds1275:
Bingo! http://www.corner-guard.com/textured_vinyl/90_degree_angle/75_inch/standard_colors/11921_-_black/view_all_products.html Made out of vinyl so it'll be flexible.
phildo77:

--- Quote from: eds1275 on April 14, 2010, 10:13:05 pm ---Bingo! http://www.corner-guard.com/textured_vinyl/90_degree_angle/75_inch/standard_colors/11921_-_black/view_all_products.html Made out of vinyl so it'll be flexible.

--- End quote ---

--- Quote from: Turnarcades on April 14, 2010, 06:49:08 pm ---Try e-mailing a few people from this link:

http://www.kellysearch.com/us-product-68494.html

--- End quote ---

Thanks for the help guys.  I just ran into one of my buddy's neighbors who does testing and marketing for Rockford Fosgate.  Apparently he makes displays and speaker cabs that use crap like this all the time.  He's going to take a look and hopefully flood me with ideas/materials.  I'll let you know how that pans out.
phildo77:
Haven't talked w/ the Fosgate guy yet but I had an idea:

Use aluminum sheets bend to 120 degrees and cut the strip to be 1/2" wide (with the bend in the center) then powder coat as the same color as T-molding and glue to the panel joint.

opinions?
Navigation
Message Index
Next page
Previous page

Go to full version