| Main > Main Forum |
| Mounting controls on a metal Control panel. |
| << < (2/2) |
| javeryh:
The easy solution is to use Gorilla Glue or epoxy to attach a piece of plywood underneath the CP. Then you can install whatever you want like normal. I did a spinner this way a while ago with Gorilla Glue: It was easy as hell and it is totally solid. :cheers: |
| trencej:
Thats what im talking about! Glue i could handle. Im just going to have to mount the parts quite high on my control panel. As its a naomi cab, where the buttons are, i onlt have about a 2 inch drop, but raises to about 3.5 at the top. But i think thats the answer. Cheers! |
| Franco B:
Which Naomi do you have? I'm curious in regards to the 4mm thick panel. Does it not already have joystick mounts? |
| trencej:
It was a virtua fighter 3 cab originally, With sanwa sticks, so no, it dos'nt have normal mounts, they seem to just have 2 screws on either side, holding on to some kind of u shaped bracket. And after just looking at it, 4mm in probably thicker than it actually is. Because of the depth of the panel, i would'nt be able to change the sticks anyway. Here, have some piccies: I have no idea why the centre panel has been covered in black laminate, was done before i got it... Yes, Thats a u360 just waiting nicely. So yeah, Mounting stuff to a panel that thin, With no more than a 2 inch drop at the front, Is proving Tricky, even in just the planning stages. Think i should stick with what i have got? |
| Navigation |
| Message Index |
| Previous page |