Main > Main Forum

Led-Wiz will not work with windows 7 please help

Pages: << < (2/4) > >>

divemaster127:

yah, bios is good.  I will unplug all & try that if still having a issue I will hook up to both of my laptops one has vista the other win 7.  I will post back
dm

HaRuMaN:

Also worth a shot, remove all USB devices, REBOOT, then plug ONLY the LED-Wiz in.



RandyT:


--- Quote from: divemaster127 on April 08, 2010, 11:23:01 am ---The ledwiz is not plug & play with windoes 7 64 bit.  I get a error usb is recogzied or the unit is bad.
Can someone point me to a driver

--- End quote ---

You are mistaken.  The LED-Wiz is very plug and play compatible with Windows 7 64-bit and needs no extra driver.  It fires right up on my Quad Core.

As others have stated, make sure you don't already have a bunch of devices hanging off the port, keeping in mind that a "port" on a PC can encompass between 2 and 4 USB connections, depending upon the way the motherboard is structured.  You aren't just dealing with the power used by the LED-Wiz, but also the devices controlled by it if no external power is supplied to them.

RandyT

divemaster127:

Well this just bites I unhooked everything on the usb & had the kb & mouse on the ps2 ports, same problem the wiz gets a install error on my computer with the gigabyte motherboard dual core processor.  I then tried on my laptop & the board installed just fine.   Any ideas I can check the bios again but trackball, spinner & ggg encoder all work fine
 :badmood:
dm

RandyT:


This is a long shot, but how about trying a different cable and/or connector on the PC?  Just in case one of your connectors has gone funky.



Pages: << < (2/4) > >>

Go to full version