| Main > Main Forum |
| Mounting a 3" TB from underneath CP without a mounting plate - any ideas? |
| (1/4) > >> |
| javeryh:
I'd love to see some examples. There can be no hardware (screws, etc.) going completely through the top. The only thing showing should the the trackball itself. The CP is going to be stained wood with no art (3/4" birch ply with 1/8" plexi on top). Any ideas? |
| HaRuMaN:
http://www.stafast.com/products/tnuts.html |
| gryhnd:
I used metal strapping. Hasn't budged: |
| Epyx:
I would do what I did for my trackball minus the flush mounted bolts...just glue the top of the trackball casing in to the routed underside of the trackball hole or as gryhnd mentioned, strap it in for something a little less permanent ;) |
| markronz:
The "Super High Trackball Install Kit" from GGG is also an option: http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=74&products_id=315 Just bought one myself, but haven't gotten to install it yet. It appears that it's bottom mounted, with just that little ring around the trackball and that's it. |
| Navigation |
| Message Index |
| Next page |