| Main > Main Forum |
| Dust washers |
| (1/4) > >> |
| bkenobi:
I have a pair of LS-30 joysticks in my CP. Unfortunately, they did not come with dust washers. I'm about to order some parts from Lizard Lick and wanted to get some washers that would fit. Anyone know if any of the washers they sell are good for a 12mm shaft diameter? Looking at the springs (http://www.lizardlick.com/images/springs.jpg), I'm thinking that the LS-32 or JWL would be big enough. There are some one sale that could be modded, but I don't know if the plastic will grind nicely or if it will just look ugly. I don't mind buying a couple extra to save on shipping for a reorder...I just don't want to have tons of extra stuff sitting around doing nothing! Does anyone know the shaft diameter on the LS-32 and/or JWL sticks? If I knew that, I'd probably be golden! :afro: |
| Havok:
I'm going to need one for my L-30; it's cracked. Please post what you find! |
| DashRendar:
Franco sells these. http://forum.arcadecontrols.com/index.php?topic=92008.0 |
| Franco B:
Cheers DashRender, I don't sell them at the moment but I may be able to. LS-32 shaft diameter is 9.8mm - washer bore diameter is around 10.3mm JLF/JLW/U360 shaft diameter is 8.95mm - washer bore is 9.5mm As you can see both will be too small for your LS-30s. I am making some more JLF/JLW/U360 washers this week along with some LS-32's. I may make some LS-30s too. Is the LS-30s shaft cover tapered? I have a LS-33 here which is tapered, aound 12mm at the joystick base and 10mm at the ball end. |
| Franco B:
Scratch that, the LS-30 is the rotary type. I have one in my parts bin I can go measure. You wanted yellow didn't you Havok? What diameter would you like them? |
| Navigation |
| Message Index |
| Next page |