Main > Main Forum

U360's keep disconnecting via USB

Pages: << < (2/2)

fytr:


--- Quote from: Dazz on March 21, 2010, 12:58:50 am ---I had this same exact issue but on XP, For me it was a power issue and I was using the Vantec hub from Ultimarc, but when mine came it didn't have the power cord.

--- End quote ---

Does anyone happen to know what kind of power adapter would fit the Ultimarc USB hub, in terms of wattage/amps, etc.? It would be nice if I could use the hub for it's intended purpose.

Ken

kegger:


--- Quote from: fytr on April 28, 2010, 05:49:00 pm ---
--- Quote from: Dazz on March 21, 2010, 12:58:50 am ---I had this same exact issue but on XP, For me it was a power issue and I was using the Vantec hub from Ultimarc, but when mine came it didn't have the power cord.

--- End quote ---

Does anyone happen to know what kind of power adapter would fit the Ultimarc USB hub, in terms of wattage/amps, etc.? It would be nice if I could use the hub for it's intended purpose.

--- End quote ---

Here is a link to it with model#if this is the same one you have, maybe that can help with tracking down a power adapter. I did read somewhere that the hub will work with devices that draw less then 500 miliamps then you need the adapter after that

fytr:


--- Quote ---Here is a link to it with model#if this is the same one you have
--- End quote ---

Hi, I think you forgot the actual link...  :)

Thx.
  Ken

kegger:


--- Quote from: fytr on April 29, 2010, 05:11:01 pm ---
--- Quote ---Here is a link to it with model#if this is the same one you have
--- End quote ---

Hi, I think you forgot the actual link...  :)

Thx.
  Ken

--- End quote ---

Sorry  :dizzy:  http://www.newegg.com/product/product.aspx?Item=N82E16817392005

fytr:

Thanks for the link!   :cheers:

I contacted Vantec customer support and they say this model is discontinued and they cannot provide power adapters for it.
However, they were nice enough to provide the required specifications for the power adapter...

It is a 5V AC Adaptor minimum of 1.2A and the connector polarity center is positive.
DC plug dimension:
    Outside Diameter: 3 mm
    Inside Diameter: 1 mm

So I'll see if I can find one one that might work. I wonder why Ultimarc doesn't provide the power adapter with the hub?

Regards,
  Ken

Pages: << < (2/2)

Go to full version