| Main > Main Forum |
| Help with configuring mame buttons.. |
| << < (2/3) > >> |
| shateredsoul:
So this is my configuration so far.. does this make sense? *** I forgot to mention that p3 and p4 are mapped on to xbox 360 controllers** this is what I'm going to reconfigure the ipac to match 1 2 3 mouse0, mouse 1, T O 4 5 6 <--- where O is the extra button that will only be used for neo geo (note this numbering does not match mame, I just used it to help me z, U, Y, X, player 2 1 2 3 a s d O 4 5 6 q w e r start 1 = 1 coind 1 = 5 start 2 = 2 coin 2 = 6 escape = esc 1up - q 1down-i 1left-o 1right-p 2up-j 2down-k 2left-L 2right-p B = Pause *just added* "G"= genre (hyperspin); "M" = Favorites (for hyperspin and maxmius, will have to edit these) I chose the letter randomly, but I tried to avoid control, alt, and shift buttons I have attached the mame.cfg, could someone check over it? Also will these keys work for a ipac? I think so far it looks like it'll be fine and that I haven't overlapped any buttons. this is suppose to be the default configuration), also how can I put in the left,up,right, and down arrow? I accidently mapped it to the config up down left and right to the joystick. <!-- X-Arcade Version 1.0 input configuration file --> <input> <remap origcode="KEYCODE_UP" newcode="KEYCODE_Y" /> <remap origcode="KEYCODE_DOWN" newcode="KEYCODE_I" /> <remap origcode="KEYCODE_LEFT" newcode="KEYCODE_O" /> <remap origcode="KEYCODE_RIGHT" newcode="KEYCODE_P" /> <port type="UI_UP"> <newseq type="standard">KEYCODE_Q</newseq> </port> <port type="UI_DOWN"> <newseq type="standard">KEYCODE_I</newseq> </port> <port type="UI_LEFT"> <newseq type="standard">KEYCODE_O</newseq> </port> <port type="UI_RIGHT"> <newseq type="standard">KEYCODE_P</newseq> </port> <port type="UI_SELECT"> <newseq type="standard">KEYCODE_ENTER OR KEYCODE_LCONTROL</newseq> </port> <port type="UI_CONFIGURE"> <newseq type="standard">KEYCODE_TAB</newseq> </port> <port type="UI_CANCEL"> <newseq type="standard">KEYCODE_ESC</newseq> </port> <port type="START1"> <newseq type="standard">KEYCODE_1</newseq> </port> <port type="START2"> <newseq type="standard">KEYCODE_2</newseq> </port> <port type="COIN1"> <newseq type="standard">KEYCODE_5</newseq> </port> <port type="COIN2"> <newseq type="standard">KEYCODE_6</newseq> </port> <port type="COIN3"> <newseq type="standard">JOYCODE_1_BUTTON7</newseq> </port> <port type="COIN4"> <newseq type="standard">JOYCODE_2_BUTTON7</newseq> </port> <port type="START3"> <newseq type="standard">JOYCODE_1_BUTTON8</newseq> </port> <port type="START4"> <newseq type="standard">JOYCODE_2_BUTTON8</newseq> </port> <port type="P1_JOYSTICK_UP"> <newseq type="standard">KEYCODE_Q</newseq> </port> <port type="P1_JOYSTICK_DOWN"> <newseq type="standard">KEYCODE_I</newseq> </port> <port type="P1_JOYSTICK_LEFT"> <newseq type="standard">KEYCODE_O</newseq> </port> <port type="P1_JOYSTICK_RIGHT"> <newseq type="standard">KEYCODE_P</newseq> </port> <port type="P2_JOYSTICK_UP"> <newseq type="standard">KEYCODE_J</newseq> </port> <port type="P2_JOYSTICK_DOWN"> <newseq type="standard">KEYCODE_K</newseq> </port> <port type="P2_JOYSTICK_LEFT"> <newseq type="standard">KEYCODE_L</newseq> </port> <port type="P2_JOYSTICK_RIGHT"> <newseq type="standard">KEYCODE_P</newseq> </port> <port type="P3_JOYSTICK_UP"> <newseq type="standard">JOYCODE_1_YAXIS_UP_SWITCH OR JOYCODE_1_HATSWITCHU</newseq> </port> <port type="P3_JOYSTICK_DOWN"> <newseq type="standard">JOYCODE_1_YAXIS_DOWN_SWITCH OR JOYCODE_1_HATSWITCHD</newseq> </port> <port type="P3_JOYSTICK_LEFT"> <newseq type="standard">JOYCODE_1_XAXIS_LEFT_SWITCH OR JOYCODE_1_HATSWITCHL</newseq> </port> <port type="P3_JOYSTICK_RIGHT"> <newseq type="standard">JOYCODE_1_XAXIS_RIGHT_SWITCH OR JOYCODE_1_HATSWITCHR</newseq> </port> <port type="P4_JOYSTICK_UP"> <newseq type="standard">JOYCODE_2_YAXIS_UP_SWITCH OR JOYCODE_2_HATSWITCHU</newseq> </port> <port type="P4_JOYSTICK_DOWN"> <newseq type="standard">JOYCODE_2_YAXIS_DOWN_SWITCH OR JOYCODE_2_HATSWITCHD</newseq> </port> <port type="P4_JOYSTICK_LEFT"> <newseq type="standard">JOYCODE_2_XAXIS_LEFT_SWITCH OR JOYCODE_2_HATSWITCHL</newseq> </port> <port type="P4_JOYSTICK_RIGHT"> <newseq type="standard">JOYCODE_2_XAXIS_RIGHT_SWITCH OR JOYCODE_2_HATSWITCHR</newseq> </port> <port type="P1_BUTTON1"> <newseq type="standard">KEYCODE_LCONTROL OR MOUSECODE_1_BUTTON0</newseq> </port> <port type="P1_BUTTON2"> <newseq type="standard">KEYCODE_LALT OR MOUSECODE_1_BUTTON1</newseq> </port> <port type="P1_BUTTON3"> <newseq type="standard">KEYCODE_T</newseq> </port> <port type="P1_BUTTON4"> <newseq type="standard">KEYCODE_U</newseq> </port> <port type="P1_BUTTON5"> <newseq type="standard">KEYCODE_Y</newseq> </port> <port type="P1_BUTTON6"> <newseq type="standard">KEYCODE_X</newseq> </port> <port type="P2_BUTTON1"> <newseq type="standard">KEYCODE_A</newseq> </port> <port type="P2_BUTTON2"> <newseq type="standard">KEYCODE_S</newseq> </port> <port type="P2_BUTTON3"> <newseq type="standard">KEYCODE_D</newseq> </port> <port type="P2_BUTTON4"> <newseq type="standard">KEYCODE_W</newseq> </port> <port type="P2_BUTTON5"> <newseq type="standard">KEYCODE_E</newseq> </port> <port type="P2_BUTTON6"> <newseq type="standard">KEYCODE_R</newseq> </port> <port type="P3_BUTTON1"> <newseq type="standard">JOYCODE_1_BUTTON3</newseq> </port> <port type="P3_BUTTON2"> <newseq type="standard">JOYCODE_1_BUTTON4</newseq> </port> <port type="P3_BUTTON3"> <newseq type="standard">JOYCODE_1_BUTTON1</newseq> </port> <port type="P3_BUTTON4"> <newseq type="standard">JOYCODE_1_BUTTON2</newseq> </port> <port type="P4_BUTTON1"> <newseq type="standard">JOYCODE_2_BUTTON3</newseq> </port> <port type="P4_BUTTON2"> <newseq type="standard">JOYCODE_2_BUTTON4</newseq> </port> <port type="P4_BUTTON3"> <newseq type="standard">JOYCODE_2_BUTTON1</newseq> </port> <port type="P4_BUTTON4"> <newseq type="standard">JOYCODE_2_BUTTON2</newseq> </port> </input> </system> |
| shateredsoul:
and this is the configuration neogeo games first then for cps1, 2 and 3 games (I have it set up so you can also use the xbox 360 controllers as player 1 and 2 for these games.. there's no 4 player neo geo or cps games right?.. wait.. neo geo may have a few) <system name="neogeo"> <input> <port type="P1_BUTTON1"> <newseq type="standard">KEYCODE_Z OR JOYCODE_1_BUTTON1</newseq> </port> <port type="P1_BUTTON2"> <newseq type="standard">KEYCODE_U OR JOYCODE_1_BUTTON2</newseq> </port> <port type="P1_BUTTON3"> <newseq type="standard">KEYCODE_Y OR JOYCODE_1_BUTTON3</newseq> </port> <port type="P1_BUTTON4"> <newseq type="standard">KEYCODE_X OR JOYCODE_1_BUTTON4</newseq> </port> <port type="P1_BUTTON5"> <newseq type="standard">NONE</newseq> </port> <port type="P1_BUTTON6"> <newseq type="standard">NONE</newseq> </port> <port type="P1_BUTTON7"> <newseq type="standard">NONE</newseq> </port> <port type="P1_BUTTON8"> <newseq type="standard">NONE</newseq> </port> <port type="P2_BUTTON1"> <newseq type="standard">KEYCODE_Q OR JOYCODE_2_BUTTON1</newseq> </port> <port type="P2_BUTTON2"> <newseq type="standard">KEYCODE_W OR JOYCODE_2_BUTTON2</newseq> </port> <port type="P2_BUTTON3"> <newseq type="standard">KEYCODE_E OR JOYCODE_2_BUTTON3</newseq> </port> <port type="P2_BUTTON4"> <newseq type="standard">KEYCODE_R OR JOYCODE_2_BUTTON4</newseq> </port> <port type="P2_BUTTON5"> <newseq type="standard">NONE</newseq> </port> <port type="P2_BUTTON6"> <newseq type="standard">NONE</newseq> </port> <port type="P2_BUTTON7"> <newseq type="standard">NONE</newseq> </port> <port type="P2_BUTTON8"> <newseq type="standard">NONE</newseq> </port> </input> </system> <system name="cps3.c"> <input> <port type="P1_BUTTON1"> <newseq type="standard">JOYCODE_1_BUTTON3 OR MOUSECODE_1_BUTTON0</newseq> </port> <port type="P1_BUTTON2"> <newseq type="standard">JOYCODE_1_BUTTON4 OR MOUSECODE_1_BUTTON1</newseq> </port> <port type="P1_BUTTON3"> <newseq type="standard">JOYCODE_1_BUTTON6 OR KEYCODE_T</newseq> </port> <port type="P1_BUTTON4"> <newseq type="standard">JOYCODE_1_BUTTON1 OR KEYCODE_U</newseq> </port> <port type="P1_BUTTON5"> <newseq type="standard">JOYCODE_1_BUTTON2 OR KEYCODE_Y</newseq> </port> <port type="P1_BUTTON6"> <newseq type="standard">JOYCODE_1_BUTTON5 OR KEYCODE_X</newseq> </port> <port type="P1_BUTTON7"> <newseq type="standard">NONE</newseq> </port> <port type="P1_BUTTON8"> <newseq type="standard">NONE</newseq> </port> <port type="P2_BUTTON1"> <newseq type="standard">JOYCODE_2_BUTTON3OR KEYCODE_A</newseq> </port> <port type="P2_BUTTON2"> <newseq type="standard">JOYCODE_2_BUTTON4 OR KEYCODE_S</newseq> </port> <port type="P2_BUTTON3"> <newseq type="standard">JOYCODE_2_BUTTON6 OR KEYCODE_D</newseq> </port> <port type="P2_BUTTON4"> <newseq type="standard">JOYCODE_2_BUTTON1 OR KEYCODE_W</newseq> </port> <port type="P2_BUTTON5"> <newseq type="standard">JOYCODE_2_BUTTON2 OR KEYCODE_E</newseq> </port> <port type="P2_BUTTON6"> <newseq type="standard">JOYCODE_2_BUTTON5 OR KEYCODE_R</newseq> </port> <port type="P2_BUTTON7"> <newseq type="standard">NONE</newseq> </port> <port type="P2_BUTTON8"> <newseq type="standard">NONE</newseq> </port> </input> </system> |
| massive88:
Best answer to this, is usually covered by u_rebelscum. Heres his response when I asked - http://forum.arcadecontrols.com/index.php?topic=78362.msg817195#msg817195 |
| shateredsoul:
so i'm doing it right then? |
| massive88:
--- Quote from: shateredsoul on March 10, 2010, 04:56:38 pm ---so i'm doing it right then? --- End quote --- I didnt read all through your code, but it looks like it! :cheers: |
| Navigation |
| Message Index |
| Next page |
| Previous page |