Arcade Collecting > Restorations & repair
Donkey Kong Jr
mr_doles:
I hate to do this but I got to ask 2 dumb questions. First is there a bottom bezel bracket. Looking at the picture in the DK JR manual it looks like there is one. See attached. I can't find one anywhere if there is one.
***EDIT*** looks like there is one but it is not repo'd so I need to find an original.
Second is the harness. I am now reading that the board does not use an edge connector. I have a harness for Super Mario Brothers which is not going to work. So what do I need to get my board working. I know that is a little vague of a question. I have the monitor and the Nintendo Monitor Cable, I will be getting the inter-board power cable with the board and I believe I have the Sound Cable, need to pull the box o' parts out. I am missing power from the battery and cables to the CP...I think.
monnom:
Hey,
I want to start to build my own arcade Donkey kong,... but do you know where I can order the stickers an other parts?
Thanx alot
javeryh:
--- Quote from: monnom on April 22, 2010, 05:43:43 pm ---Hey,
I want to start to build my own arcade Donkey kong,... but do you know where I can order the stickers an other parts?
Thanx alot
--- End quote ---
Mike's Arcade.
mr_doles:
--- Quote from: monnom on April 22, 2010, 05:43:43 pm ---Hey,
I want to start to build my own arcade Donkey kong,... but do you know where I can order the stickers an other parts?
--- End quote ---
I actually got the stickers, marquee, and bezel from arcade shop. Other stuff I got from Mike's.
mr_doles:
Monitor has been capped and cleaned up. Without the harness I can't test the monitor to make sure it works after the cap kit. I ended up buying a repo harness from KLOV, it is a little pricey but everyone who has bought one swears by it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version