| Main > Main Forum |
| Does this ball top exist? |
| << < (2/2) |
| Epyx:
--- Quote ---You could try a Sanwa JLW with a longer shaft. Never tried one myself though. --- End quote --- +1 I have a pair from Ultimarc that are going into my current project. I have tested them out on a test board and they are fantastic sticks and very mod friendly. In my current project you can see I got them with green after market balltops that have leds in them. --- Quote ---Here are my prerequisites: 1 - Must fit on a 3/4" wood panel 2 - Must mount from underneath 3 - Must be 8-way, just like the comps I already have on there 4 - Would love to have them in blue, red, green and yellow if possible. (optional) --- End quote --- Check (with some routing), Check (again with routing), Check (4 way and 8 way switch...great feel), Red, blue (2 shades), green, pink, grey, yellow, white + translucent versions for LED mods. |
| TOK:
I got an 8 way Sanwa JLF with red balltop from Lizard lick. Think it fits your criteria. I bottom mounted mine in my Defender bartop and had to shim it down to get correct, low Defender height. |
| Grasshopper:
--- Quote from: DeLuSioNal29 on March 03, 2010, 08:21:49 pm --- I was looking at Lizardlick's WICO NOS Joystick s(with 4 inch shaft). But they only come in red. Would these look OK on a wood panel? My problem is I'd love a Seimitzsu or Suzo joystick, but they are made for metal CPs and aren't long enough if mounted underneath. --- End quote --- If you're talking about the Suzo 500s then you're wrong. They can easily be mounted underneath a 3/4" wood panel. Although they're designed to be mounted on a metal panel with the pivot visible, I actually think they look nicer mounted underneath wood with the pivot hidden. |
| Navigation |
| Message Index |
| Previous page |