Main > Main Forum
Is it possible to get an input in Mame to trigger an ouput in LED-Wiz?
BadMouth:
Keep us posted and please do a write up!
I have a big 'ole mounted gun that I was trying to trigger a feedback motor on a while back.
Every time I thought I had a simple solution figured out, it threw me a new curve.
One of many unfinished experiments. :-\
1UP:
Check out this thread: http://forum.arcadecontrols.com/index.php?topic=100880.msg1086713#msg1086713
BadMouth:
Thanks, but I'm trying to avoid scripts, extra configuration, etc.
The feedback motor is just a lopsided weight on a dc motor.
It just needs to spin whenever the trigger is held in. It's currently
wired to a solid state relay with a 3v trigger point. It works fine
if I use 5v from a gameport to trigger it, but when I use
the ground that registers a button press, the voltage drops to
2.5v and the relay doesn't activate. I set it aside for a while because
I was afraid of damaging something. There was a thread about
illuminating buttons when they are pressed a while back and I got
some new ideas from that, but just haven't taken the time to mess
with it.
1UP:
Sorry for the confusion. My reply was intended to answer Shilmover's question.
ntk:
i ask the ledblinkey creator same question a month a go and this is what he told me
"LEDBlinky can flash on a button press (or joystick if it’s not analog) but only when the front-end is active. During game play the flash feature is disabled for performance reasons."