| Main > Main Forum |
| GGG Electric Ice-T Trackball Question (wiring) |
| (1/1) |
| Underhill:
I've searched all over the forums for an answer to my question but to no avail. I'm posting here since I'm hoping to get a quick answer from someone that happens to own an Electric Ice-T trackball. If not I'll shoot Randy a PM or email. I have a GGG Electric Ice-T Trackball (USB) and have everything wired up to the LED Wiz +GP. The wires coming from the trackball itself are all connected to a small circuit board but one. The one that is not I am assuming is the ground. It has 2 green wires really but both are going to 1 ring terminal connector. These are the wires coming out of the trackball housing itself NOT the rgb lighting. My question is... What do I connect the green wires to? Do I need to connect it to a ground on the PC (not sure how to go about it if so)? Thanks in advance. |
| fallacy:
I did not connect the ground to anything. It is basically a USB mouse why to I need a ground for it :dunno |
| Underhill:
Sounds good. Thank you fallacy. |
| Navigation |
| Message Index |