| Main > Main Forum |
| Ultimarc U-HID won't be seen as mouse by PC |
| (1/1) |
| AE35:
Hey all! This is driving me nuts ;D I have a U-HID that I need to use as a mouse on the PC(optical wheel, x-axis). I've set 4 U-HID pins to do this, with two being quadrature, one being +5V and one being gnd. But it doesn't work. If I instead connect my Ultimarc optipac next to it, the wheel works right away! I wuld hate having two interfaces in the cabinet when I should only need the U-HID Any advice? Thanks! Nicholas |
| AE35:
Anyone? :) |
| AndyWarne:
probably best to drop me an email about this: andy@ultimarc.com |
| AE35:
Ok, thanks!!! Nicholas |
| Paul Olson:
If the wheel you are using is active low, it will not work with the uhid. I have a few from a Badlands machine that fall into this category. I was hoping to use one encoder in my cab as well, but unless I replace the optic boards in my steering wheels, it won't happen with the uhid. |
| Navigation |
| Message Index |