Main > Main Forum
Ultimarc UltraLux chrome button insert
(1/2) > >>
Charlie97L:
how do you open this to put the insert in?  i got one to use as a coin button on my bartop, and for the life of my cannot figure out how to get it open.

this is the product to which i am referring...

http://www.ultimarc.com/ultralux.html

thanks guys!
Havok:
I don't have them, but I imagine they would be similar to Happs buttons. There should be two tabs on the bottom of the button, that actuate the switch when fully assembled. Push the tabs in towards the center of the button, and at the same time push up. This should pop the button out of the housing allowing you to put in an insert.

Here's an exploded view to give you a better idea:

Ginsu Victim:
Remove the button plunger from the assembly and there is a cap on the end. Pop it off, install the insert, and put the cap back on.
Encryptor:
The Ultralux buttons are lighted so you'll have to pull out the socket (should just pull straight out) for the bulb before you can get to the plunger and remove it similar to the diagram Havok posted. The Ultralux micro switches are mounted horizontal instead of vertical.

Encryptor
Ginsu Victim:
FYI, the socket doesn't come installed on Ultralux, so it shouldn't be an issue.
Navigation
Message Index
Next page

Go to full version